One obvious need for any organisation is to have a good communications network. What’s not so clear is how to achieve this at low cost and without sacrificing quality.
But there is a way. By combining VoIP (Voice over Internet Protocol) technology with your existing phone wiring or Cat 5 cabling, organisations can deploy a IP Telephony solution without the need to upgrade their network or invest in new cabling. This means companies can benefit from cheap calls, voice and data communication over the same line, and a voice service as good as any offered by a standard telecoms provider. All you have to do is install a Phybridge UniPhyer.
Historically the challenge of deploying an IP Telephony system for any organisation presents numerous challenges and considerations that are often overlooked without an experienced partner to guide them through his process.
For any company that is considering deploying a VoIP solution for the first time, can be presented with a number of unknowns that are out of their control like assessments, new switches, new cabling, configuration and disruption during deployment. Of course these can all be managed, but in a recent Nemertes study of over 1,400 companies approximately 840 of them underestimated network readiness cost resulting in compromising their return on investment.
The Phybridge UniPhyer leverages existing telephony cabling to provide a complete IP network for voice and data which allows you to centrally converge with the LAN.
The Phybridge UniPhyer instantly provides a dedicated path for voice, QoS and POE to every desktop.
The UniPhyer eliminates all the unknowns with more of your budget being allocated to applications hence driving a better return on investment.
Cost Effective IP phone solution
What’s more, the Phybridge UniPhyer is cost effective. You don’t have to carry out a network assessment prior to installation. You can use your existing phone cabling and network regardless if you have POE (power over Ethernet) switches or not.
Installing Phybridge
The only devices you need are the Phybridge UniPhyer and PhyAdaptors for your IP phones. The installation process for these is straightforward. You connect the UniPhyer to your existing phone line, and to your IP PBX or your router/LAN.
The next job is to connect PhyAdaptors to your phone jacks, and your IP phones to the PhyAdaptors. With everything in place, you’re ready to go. There’s no need to use any migration software.
Risk Free Implementation
Installation is risk-free. You don’t disrupt your workplace by ripping out your existing cabling infrastructure and replace it with new Cat5 or Cat 6 cabling.
Creating a new VoIP system
And if you aren’t an existing VoIP user, there’s no reason why you can’t install the Phybridge UniPhyer with a new IP Telephony solution . From day one, you achieve savings compared to your previous use of standard phones.
Voyager has recently installed a ShoreTel IP Telephony system with a Phybridge UniPhyer solution at one of the UK’s most prestigious Cathedral’s where re-cabling wasn’t an option due to it being a Grade II listed building. The UniPhyer and PhyAdaptors has allowed this organisation to deliver the benefits of a IP Telephony solution without the need to invest in new PoE switches or Cat5 cabling.
Simple and fast communications network
The Phybridge UniPhyer makes your communication network simpler and reduces your costs. And the installation is fast and stress-free. The benefits speak for themselves.
For more information on the Phybridge solution please contact us.
